The Vaddio AutoVIEW AutoPresenter is an automated content presentation and PTZ camera control system that can be used as a stand-alone video switcher or with a variety of presenter controlled applications with Vaddios preset camera trigger devices. For each PTZ camera connected, a CAT-5 cable is run to the RS-232 input of the camera offering the pan, tilt, and zoom positions to be sent to the camera for preset camera positions. The AutoPresenter features up to 72 presets for up to 6 PTZ cameras. The multi-format 6 x 1 video switcher accepts any combination of signals from HD YPbPr video (1080p, 1080i or 720p) or SD (YC composite), and RGBHV (up to UXGA resolutions) inputs, and also creates a common aspect ratio and resolution by up or down conversion of each video input. The AutoVIEW AutoPresenter features an additional output converter which converts YPbPr component video to a DVIHDMI digital output for integrating with Tandberg and Polycom codecs. It includes video transitions such a s fades, wipes, and dissolves with .01 to 4.0 second speed transitions that can be programmed as required. The AutoVIEW AutoPresenter features a PIP option which displays content at 5 different screen positions with 3 different sizes for each position. A Master RS-232 Control Port allows the user to send RS-232 signals to control the attached equipment, allows receiving commands from third-party hardware, and is a connection for updating firmware on the system.